-
Storage method of hot melt pellets
Aug 16 , 2021
Storage method of hot melt pellets: Precautions : 1. Sealed and stored. Hot-melt rubber particles will absorb moisture when exposed to the air. It is impossible to judge whether it absorbs water due to its appearance. The water-containing rubber particles tend to foam when they are melted, and reduce the bonding strength. Therefore, seal it to prevent moisture after application. 2. Hot-melt rubber...
Read More
-
The reason why the hot melt glue machine does not heat up
Aug 16 , 2021
With the change of the times, mechanization is getting closer and closer to life. Most of the products used in life need to be bonded to form objects. The glue required for traditional bonding has been gradually eliminated with the strengthening of environmental protection awareness, and the environmental friendly hot melt adhesive has gradually appeared in the public view, Among them, the essenti...
Read More
-
How to choose a good hot melt hose?
Aug 19 , 2021
From the analysis of the current sales, the glue machine hose has occupied most of the market, but how to distinguish the inferior hot melt glue hose? Let me share some small methods for everyone. 1. The insulating layer is easy to wear and leakage occurs 2. Glue leakage occurs when the insulating sleeve is broken 3. The rusty joints will also cause glue leakage 4. The pipe bursts due to uneven he...
Read More
-
How to correct the crooked glue strips ejected from the hot melt glue machine
Aug 21 , 2021
1. During the glue spraying process of the hot melt glue machine, the glue strip is not straight when it is turned on from the beginning. , Do not hit the air pressure too high, it should be within the specified range of the hot melt glue machine manual. 2. If the glue spraying of the hot melt glue machine is stable at the beginning, and the glue path is skewed during the walking process, it can b...
Read More
-
Development history of hot melt adhesive
Aug 26 , 2021
Hot melt adhesive has been used in packaging since the late 1950s. Due to its unique advantages, it has incomparable advantages compared with other adhesives, and has become one of the fastest developing varieties of adhesives. It is widely used in corrugated board manufacturing, corrugated box forming, paper bag manufacturing, etc. it was popular in Europe and America from 1960s to 1970s, and is ...
Read More
-
The correct way to operate the hot melt glue machine
Oct 26 , 2021
The hot melt glue machine is a widely used equipment, and the operation is relatively simple, but if you want to use it for a long time and have a low failure rate of the equipment, it is necessary to reduce the wear and tear in the working process. The hot melt glue machine's movement speed, changes in working temperature, environmental cleaning, maintenance and other methods will bring wear and ...
Read More
-
What are the major factors that affect the quality of hot melt adhesive machine edge banding?
Oct 27 , 2021
In the woodworking industry, the hot melt glue machine uses spray glue to seal the edges, which is widely used. At the same time, its edge sealing quality is affected by several factors. These are also the major factors that should be paid attention to when using the hot melt glue machine. What are these factors? 1. The production speed of the enterprise. The production speed of the hot melt adhes...
Read More
-
The difference between glue spraying and scraping
Oct 27 , 2021
Some industries need to spray glue, and some industries need to scrape glue, which is mainly selected according to the customer's process requirements. The hot melt glue gun used in the hot melt glue machine equipment spraying and scraping is different, there are two main differences: 1. The glue gun used for spraying glue does not need to be in contact with the material and has a certain distance...
Read More
-
Clear ing Nozzle Assembly
Nov 18 , 2021
Clear ing Nozzle Assembly Nozzle will be jammed if filter assembly is blocked or broken, or if chars exist in hose/glue tube or nozzle assembly. Chars is formed because hot melt is overheated. Sometimes in these circumstances hose/glue tube and nozzle assembly need to be changed completely. Heat the nozzle assembly to desired temperature. -Minimize the air pressure of the cylinder pump of the hydr...
Read More
contact us
