-
How to identify hot melt adhesive quality
Aug 07 , 2021
There are many quality indicators of hot melt glue, requiring dedicated instruments and appropriate detection environments, in the absence of instrument equipment, is first seen from the appearance, there is no bubble. Secondly, the rubber is melted into a width of about 1 cm. Thick 0.2cm tape. After cooling, use it to extend the tape, and observe whether its stretch can achieve standards. Whether...
Read More
-
Application of hot melt adhesive machine in paper industry
Aug 09 , 2021
The hot melt adhesive machine is also widely used in the paper packaging industry. When using the hot melt adhesive machine in paper packaging, we need to pay attention to the temperature control. When the hot melt adhesive machine is heated to 1.5 ~ 1.7 times its melting point, it is applied to the first layer of di (single-sided corrugated board). The hot melt adhesive has the most appropriate s...
Read More
-
The bonding effect is good, and the surface treatment before gluing is indispensable
Aug 09 , 2021
Bonding generally refers to the bonding of two items through the action of hot-melt adhesive, and the bonding area of two items is called bonding surface. Before spraying glue by hot-melt adhesive machine, we need to treat the surface of bonded objects for better bonding. Any material will inevitably be stained with some stains in production and processing. Oil stains or some impurities, if the ma...
Read More
-
What is the reason for the insufficient amount of glue in the pump of the hot melt glue sprayer?
Aug 11 , 2021
The hot melt glue machine can work 24 hours a day, but what is its working principle? In fact, it is very simple, mainly by heating the hot-melt adhesive, and transporting the liquid hot-melt adhesive through power. The pump of the hot melt glue machine is the main power and the center of the operation of the hot melt glue machine. Sometimes when working, there will be insufficient pumps. This sit...
Read More
-
Precautions and treatment methods for surface hot melt adhesive bonding
Aug 11 , 2021
The key points of hot melt adhesive bonding knowledge and some basic processing methods. To activate the surface to be adhered, through chemical or physical methods, some polar groups are introduced into the surface layer, so that the low-energy surface becomes the high-energy surface, the inert surface becomes the active surface, and the difficult-to-stick surface becomes the easy-adhesive surfac...
Read More
-
Application of hot coating machine in medical industry
Aug 13 , 2021
Manufacturers have their own unique requirements for medical packaging (including medicines and medical devices), including reliable barriers that can withstand sterilization, prevent medicines from being secretly changed, easy to use, strong in texture, reasonable in price, and easy to use. Timely delivery, reliable technical backing, etc. For a multi-layer composite material, it is required that...
Read More
-
The reason why the sealing machine is not strong
Aug 14 , 2021
1. Material selection of the box: The selection error mainly refers to the imperfect matching of the hot melt adhesive or the type of boxes that need to be bonded, and it is difficult to meet the process requirements of the material itself. 2. The temperature during compounding does not meet the requirements: The compounding temperature does not reach the melting point of the adhesive film or omen...
Read More
-
Types of hot melt glue gun
Aug 14 , 2021
The hot melt glue gun is a supporting tool for the hot melt glue machine. It is used to apply glue to the material. The hot melt glue machine melts the glue and then sprays the glue onto the material with the glue gun. As the hot melt glue machine is beginning to be used in more and more industries Therefore, in order to allow customers to use them better, hot melt glue machine manufacturers have ...
Read More
-
The reason why the hot melt glue machine does not heat up
Aug 16 , 2021
With the change of the times, mechanization is getting closer and closer to life. Most of the products used in life need to be bonded to form objects. The glue required for traditional bonding has been gradually eliminated with the strengthening of environmental protection awareness, and the environmental friendly hot melt adhesive has gradually appeared in the public view, Among them, the essenti...
Read More
contact us
