Cleaning steps of hot melt adhesive machine:

1. It is necessary to set the temperature of the hot melt adhesive machine system to the operating temperature;

2. Remove the filter from the branch seat, and check whether the filter needs to be replaced;

3. If it needs to be replaced, install a new filter, and at the same time use a new sealing ring and apply high-temperature oil;

4. If it does not need to be replaced, it should be cleaned with a professional cleaning agent to wipe off impurities and carbides, and then it can be used after installation.

Be very careful during the cleaning process. The hot melt adhesive machine is a high-temperature product, and accidents will occur if you are careless:

Before cleaning the filter screen of the hot melt adhesive machine, be sure to turn off the switch to avoid electric shock

Be sure to wait for the hot melt glue machine to cool down before cleaning to avoid being scalded